Page 25 - SIGNAGE
P. 25
LADDER
TAGS
The AssetTag holder should be
permanently fixed to the ladder AssetTag
in a suitable safe place. 55 x 210 x 6mm
TGOT5
Perform an inspection of the
ladder (a checklist is printed
on the reverse) and record the
result on the tag. If the ladder
fails the inspection remove 10 Holders
10 Inserts
insert and inform a supervisor. 1 Pen
TG04BOX
Description Qty Code
Single Insert 1 1 TG04-1
Pack of 10 Inserts 10 TG0410
Pack of 50 Inserts 50 TG0450
Kit 1 1 Holder, 2 Inserts, 1 Pen TG04KIT
Box 1 10 Holder, 10 Inserts, 1 Pens TG04BOX
AssetTag 5 TGOT5
Ladder Tag
50 x 181mm
Polypropylene
TG04-1
The Work at Height Regulations came into force in 2005. These regulations apply to work at height where there is a risk of fall liable to cause
personal injury. This applies to both internal and external work at height, and includes below ground level and low height.
All ladders should be checked daily and prior to use for any damage, faults or wear and tear. In addition they should be inspected at defined
intervals as part of a risk assessment programme. Use these inserts to manage the safety and maintenance of ladders and help conform to the
Work at Height Regulations 2005.
32
